Photovoltaic Simulator Provides Higher Output Current and Power, Increasing Rack Space Power Density by 50%
SAN DIEGO – AMETEK Programmable Power, the global leader in programmable AC and DC power test solutions (programmablepower.com
), has expanded its industry-leading Elgar Terrestrial Solar Array Simulators (TerraSAS™) line of standalone photovoltaic (PV) simulators.
With the newest Embedded TerraSAS™ (ETS), users can now test isolated and non-isolated string inverters with voltages (Voc) up to 1,000 VDC and currents (Isc) up to 15 A, resulting in a 50% increase in output power compared to the prior 1000X ETS model. The new ETS1000Y is available in three configurations: [5kW] 1,000 VDC @ 5 A, [10kW] 1,000 VDC @ 10 A and [15kW] 1,000 VDC @ 15 A.
The TerraSAS™ PV simulator consists of an agile high-performance, programmable DC power supply with control software and GUI interface, high output isolation, and a unique embedded PV simulation engine that provides the I-V curve in a single standalone unit. The power supplies in the TerraSAS™ PV simulators are typically ten times faster than standard power supplies, allowing users to test even the most advanced solar inverters.
In addition to this industry-leading performance, the new ETS now offers improved Over-Voltage Protection (OVP) and Over-Current Protection (OCP). This allows the device to be used for sensitive simulation applications without tripping, such as inverter testing in electrically “noisy” environments.
AMETEK Programmable Power developed the TerraSAS™ line for testing microgrids, energy storage and inverter test applications. The TerraSAS™ series photovoltaic (PV) simulators are specifically designed to emulate the dynamic electrical behavior of a terrestrial PV solar array. They offer low output capacitance and high closed loop bandwidth to keep up with the advanced Maximum Power Point Tracking (MPPT) algorithms used in today’s grid-tied inverters.
The new ETS versions can be configured to use a 3-phase AC input voltage of 187-242 VAC, 342-440 VAC, or 396-528 VAC. Output voltage noise is less than 0.6 Vpp, and output current noise is less than 200 mApp.
About AMETEK Programmable Power
AMETEK Programmable Power designs, manufactures and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. It offers one of the industries' broadest portfolios of programmable power products under the Sorensen
, California Instruments
For more information on any of AMETEK’s programmable power supplies
and programmable loads, contact an authorized AMETEK Programmable Power sales representative by visiting programmablepower.com/contact/
. AMETEK Programmable Power also can be contacted directly toll free at 800-733-5427 or 858-458-0223, or by email: email@example.com
AMETEK Programmable Power is a business unit of AMETEK Electronic Instruments Group, a leader in advanced instruments for the process, aerospace, power and industrial markets and a division of AMETEK, Inc., a leading global manufacturer of electronic instruments and electromechanical devices with 2014 annual sales of $4.0 billion.
For further information contact:
Tel: (858) 678-4459
Click here for a hi-res image of the Elgar Terra SAS Solar Array Simulator